Nibelungenstraße 100 | Bensheim, 64625

Lloyd is a leading bike fit technologist, both in terms of using the most advanced technologies during his fits and also helping to develop new bike fitting tech for the future.

Lloyd works with numerous ProTour riders to help dial in their position for races like the Tour de France, but is just as keen to help amateur and club riders.

Bangkok

Retul certified fitter
Retul advanced certified fitter
Retul positioned for speed certification course
Retul TT & Triathlon bike fit course
ISCO level 1
ISCO level 2

510 E 73rd St | New York, New York, 10021

Happy Freedman has been fitting for more than 30 years and has taught bike fitting courses and presented at conferences across the world.

Happy uses a 3D motion capture system, pressure mapping and a host of other equipment in his performance lab.

9376 E Bahia Dr | Scottsdale, 95260

Paraic has been coaching and fitting elite athletes since 1991 when he became a full time coach educator active in cycling research. He was one of the key development staff in the eSoles Custom Footbeds before joining SICI in 2008 as their Director of Cycling Sciences.

Pariac is a Dartfish Certified Analyst and has a passion for 2D and 3D analysis and technologies.

In 2011 Paraic helped to develop “FASTER”, a state of the art cycling performance facility with a wind tunnel, retail, physical therapy, performance testing, cutting edge bike fitting and training recovery suite.

26932 Calle Esperanza | San Juan Capistrano, California, 92675

We provide you with your own personalized Bike Fit which starts with an evaluation of your flexibility. We also look at your Pedaling Efficiency via the Computrainer and SpinScan software. What Makes Us Different from Other Bike Fitters? First off, we give every client the same great service, the same level of detail, whether you are a USA National Champion like Chris DeMarchi, or in your 70’s and just taking up cycling again. Our process looks at Bike Fitting from the viewpoint of a Physical Therapist/Kinesiologist. Someone that knows Anatomy and Kinetic Chains. You are not thrown up on some bike fit machine and forced into some non-natural position just because some numbers from a computer data base tells you. Our Bike Fitting Process is professional and personalized and is the cornerstone and foundation for whether your aim is to increase power and speed for racing, cruise faster or longer, or simply to increase your comfort on the bike. Bike Fitness Coaching can help.

3200 Leonardtown Road | Waldorf, Maryland, 20601

Chris started fitting in 1995 and has fit over 5,000 riders, including; pro racers, recreational riders, and weekend warriors.

Fit Education includes:

Fit Kit level 1
Fit Kit Level 2
Advanced Fit kit certification
Michael Sylvester fit school with Trek Bicycles
FIST With Dan Emfield (2 times)
Wobble Naught and Dartfish with Tom Coleman
DFU certified from the Guru bike company in Canada
Guru Certified from Dorel sports
Waterford Fit Master with Richard Schwinn
Mat Steinmetz Aero Bike Fit seminar
Seven Custom bike school with Neil Doshi
Trek Precision Fit school 1
Trek Precision Fit school 2 with Pressure mapping with Paric McGlynn
3 days with Chris Balser (IBFI level 4) learning to work with EMG and MOXY

Tools used in fit studio:
Guru machine, Computrainer, Saddle pressure mapping, Dartfish 2d HD camera and Guru connect camera for simultaneous views, RAD, Laser level device, Fit Kit tools, Bike Cad, Aline laser device for adjustable insoles, 360 degree rotating fit platform with adjustable incline.

The Hovel | Blisworth, Northants , NN7 3DB

Since Drag2Zero was established in 2007, theyhave been using tools such as wind tunnels and CFD to aerodynamically optimise the system that is a cyclist and his/her equipment.

Strype Street | London, E1 7LF

Jorrit's training includes:

- BSc Human Movement Sciences
- MSc Human Movement Sciences; specialisation Sport
- ISCO Symposium 2013
- ISCO Level 1
- ISCO Level 2

Jorrit uses a Retul 3D motion capture system along with Shimano's Dynamics Lab Fitting Jig and 3D Pedaling Analyser during his fits.

12518 130th Lane NE | Kirkland, Washington, 98034

BikeFit's products are used by cyclists and triathletes in every major cycling and triathlon event around the world, from the Spring Classics to the three Grand Tours, from long distance triathlon to Ironman World Championships.  The products have been used in countless national championships, world championships and by an Olympic Gold medalist.

1432 Pedernera | Córdoba

G0.uillermo has attended the following bike fit courses:

-"Webinar para el Rendimiento y Prevención de lesiones en el ciclismo de Ruta y Mountain Bike" - June 2015 - International Endurance Group - G-SE
-"Biomecánica del ciclismo" - June 2016 - International Endurance Group - G-SE
-BikeFit:The Foot/Pedal Interface - BikeFit - February 2016
-Curso de especialización en el pie en el ciclismo, Inteface pedal-zapatillas,Ajuste de calas, Resolución de problemas comunes. - November 206 - Custom4

During his fits, he uses 2D video analysis with Kinovea as well as laser levels, goniometer, cleat measuring tools and an inclinometer

Urbanização do Cardal | Pedrulha, 3025-248

Cyclos Bike Studio uses a variety of different rechnology such as

- Laser tool,
- Smart trainer (tacx flux),
- Motion Analyzer (single side 3d system) from Bikefitting.com,
- Position simulator from Bikefitting.com, that is and adjustable Bikefit Bike, that has a module of Pedaling Analysis in the pedals ,
- Different size of road handlebars, MTB bars and some different sizes saddles.

As for the training of the 2 fitters

one of them graduated in nursing, in 2004 and works in a Central Hospital in the Operation Room, and has been working in the Ortopedic team from the last 11 years.

About Cousers , both of them went 4 days to Sittard (Holand) this February, to the Research and Education Center of Bikefitting.com to do our certification.

3200 Solomons Island Road | Edgewater, Maryland, 21037

Stu has attended the following courses:

Bike Fit (Paul Swift) 1 day
Cyclologic (Paraic) 3 day
FIST (Dan Empfeild) 3 day
Retul (with Todd Carver)
5 day Level 1/TT
5 day Level 2
3 day Master
2 day Instructor
2 day Symposium
SBCU (with Andy Pruitt)
3 day Level 1
3 day Level 2
3 day Level 3

Conferences 2 day 2016 MCC

During his fits, Stu uses:
Retul Vantage Motion Capture
Gebiomized Saddle Mapping
2nd Gen Guru DFU
Insoles (stock and custom)
Foot Scanner
Test Saddles
Power trainer
Laser Levels

van Kolplein 5 | Velp, Gelderland, 6882 JE

Bicycle-Kings biedt diensten aan voor de renner die meer zoekt dan het gebruikelijke.
Onze slogan is niet voor niets ""Ride like a King, Perform like a pro"".
Wij gaan uit van het idee dat de fiets moet passen bij de renner en niet dat de renner zich moet aanpassen aan de fiets.

3600 The Barnyard | Carmel-by-the-Sea, 93923

Chris' training includes:

USA Cycling Level 1 Power Based Training Certified Coach
BG Fit Level 1
BG Fit Level 2
BG Fit Level 3
Medicine of Cycling Conference 2014

Chris uses High Speed Video Analysis during his fits

22 Temple Street, Keynsham | Bristol, BS31 1EH

We're an independent bike shop and coffee shop situated between Bath and Bristol in Keynsham. Our fitter Jon has experience using some of the worlds most advanced biomechanical and physiologcial assessment tools during his university studes . We have crafted our fit studio and fitting ethos without affiliation to any major brands. Instead our fit decisions and product choices are informed by our understanding of human biomechanics and physiology.

Athlete Lab | London, EC4N 6EU

Stefanie has attended the following courses:

Torke cycling Body Positioning – Advanced
Torke cycling Foot Correction and Pelvic Asymmetry
Torke cycling Saddle Fitting
Torke cycling Aerodynamic preferencing

Stefanie also has a BSc(HONS) in Sport and Exercise Science and a Masters degree in Sports Biomechanics.

1 Rue Georges Kayser | Nospelt, 8390

Patrick's training includes:

Physical therapist in reeducation
Physical therapist in sport revalidation
Manual therapist BELSO, FNDLK & TMA
ICS 25th-26th January 2012
ICS 24th-26th January 2013
ISCO 11th-12th November 2013
ISCO Fit school Level I & II
ICS 13th-14th February 2014
Science & Cycling 1st-2nd July 2015
ISCO 09th-10th November 2015
2 days with Tony Corke in Eindhoven
Science & Cycling in Caen 4 days (2 masterclasses and 2 days conference)
ICS Manchester 2 days
Lecture at a symposium in sports medicine in Belgium
F.I.S.T. certification with Dan Empfield: 5 days

Patrick uses gebioMized saddle and insole pressure mapping during his fits, as well as 2D video analysis.

170 Osloveien | 1440

Petter has worked with riders from Protour to hobbyists and everybody
inbetween. He is one of the leading fitters in Scandinavia and he works with the IBFI as our Regional Representative there.

- Retül Fit Technician - Since 2011
- ISCO fit school Level 2 - 2013
- ISCO bike fitting Symposium - Münster 2013
- Works with the Norwegian Olympic Centre

429 Nepean Highway | Brighton East, 3187

Paul has a Masters degree in Physiotherapy and is currently studying a part-time PhD. His extesnive tendon research has been published in several scientific journals.

He has attended numerous bike fit courses and conferences, and has travelled the world educating bike fitters on cycling overuse injuries.

Cycling Injuries and Biomechanics Course 2004 1 day - Trish Wisbey-Roth FACP
Specialist Sports Physiotherapist,
Bike Set-Up course - 1/2 day - part of L3 Sports Physiotherapy Course
Presenter - Science Of Cycling, Injury Prevention : Physiobikefit & Cycling Injuries Course 1-2 days - 2013-2016 Melb, Sydney, Newcastle, Edinburgh, Varese, Holland, France (x12)
Presenter - Cycling Science Conference, Slovenia 2016

Rua Capitão Tomás de Aquino 2150 Cond. | Teresina, Piaui , 64056-520

Daniel is a fitter based in Brazil trained up to level 2 by BikeFit he also uses a multitude of different technologies in his fits.
- Goniometer
- Forefoot Measuring Device
- Self-leveling Laser
- BikeFit Pro iPad App
- Cleat Wedges
- ITS Wedges
- LL Shims
- Pedal Spacers

9 Lower Holme | Bradford, West Yorkshire, BD17 7EY

I share a facility with Tri Mechanics who specialises in gait analysis. The studio has plently of space to fit a SRM jig with full adjustability, power meter, crank 150-190mm adjustable + and a turbo for customers bike. I have a couple of video cameras with high FPS (30 and 60) for cature linked to software on my laptop + linked to a montior infront of the customer so can see differences when cycling. The studio also has medcine balls, foam rollers, yoga mats, stretch cords and bands, and critically floor space for the purpose mobility and strength and conditioning exercise. Both businesses offer triathlon coaching too.

26 Eastwood Ct | 94611

Bryan Ausinheiler has a host of bike fitting qualifications, including:

-BS in Exercise Science at James Madison University including a Thesis on the assessment of fatigue during cycling
-MS at San Francisco State University
-DPT at University of California San Francisco
-Attended 2014 Medicine of Science Conference
-20 hours of study on bike fitting under Curtis Cramblett LPT, CFMT, USA Expert Cycling Coach, CSCS 
-Fitted professional cyclist Sara Clafferty of Team TIBCO

1143-1145 Christchurch Road | Bournemouth, BH7 6BW

Between the 3 fitters at the shop we combine over 30 years of experience utilising best practice to ensure your bike leaves set up correctly no matter whether you are a weekend warrior looking to complete your first sportive, or world champ looking for the marginal gain to get you the Gold!

The fit studio is separate to the shop to ensure that you get the best uninterrupted service. We utilise a Trek precision fit Jig, saddle pressure mapping and video capture technology to ensure all measurements are accurate, repeatable and quantifiable. We can make custom Orthotic grade insoles using the Sidas insole machine or offer off-the-peg insoles to help stabilise the foot should you need it.

We are proud stockists of Fabric, Fizik, Bontrager and Giant saddles which are available to demo so you can guarantee that it works before spending the money. To compliment the fit we offer a money back guarantee should any recommendations we make not resolve the issue, we are that confident in our recommendations!

We offer bike sizing services to ensure a bike fits before you purchase, this can be done on any bike not just brands we stock, however if a bike is purchased through us as a result of the sizing we knock the sizing price off the RRP of the bike.

Bike fits start at £99 and all come with with a free follow up appointments to iron out and issues that arise from a change in position and/or equipment.

Bike Science Ltd | Bristol, BS8 2XU

Andy Sexton : Bike Science Head Fitter

Head fitter and founder and owner of Bike Science Andy Sexton was only the second fitter in the UK to gain Retul certification, a British Triathlon Level 2 coach and qualified sports massage therapist. He worked as head of road and triathlon sales for Planet X bikes for four years before starting Bike Science, fitting over five hundred riders during that time.

Andy's qualifications include:

Retul certification
BikeFit pedal/foot interface course
Bike Science: Cycling and the pelvis
Instructor on Bike Science: A physio's guide to bike fitting

Andy uses a 3D motion capture system for his fits

Tervuursevest 143 | Leuven, 3001

Joris has a postgraduate degree in Physiotherapy and has worked with some of the leading professional cyclists in Belgium and Holland, including:

Teams: Etixx-Quickstep, Topsport Vlaanderen – Etixx – GuillD’or, BMC-Etixx Pro Triathlon Team, Crelan - Vastgoedservice
Federations: Royal Belgian Cycling Federation, Flemish Triatlon-Duatlon Liga

He also delivers bike fitting courses at the Bakala Academy.

He has attended the following conferences:

ICS in 2013 and 2014
ISCO 2014
Science and Cycling Conference Caen 2016
Cycling Science, Slovenia (presented) 2016

During his fits Joris uses video capture, 3D pelvic motion analysis and saddle pressure mapping systems.

5 Maskevarreveien | Tana, 9845

Ole has a degree in Sport Science and has attended several Retul bike fitting courses, including:

Retul level 1
Retul level 2
Retul certification

He uses a 3D motion capture system during his fits

18 Sin Ming Lane, Unit 04-05 | Singapore, 573960

Timothy has a wealth bike fitting experience including:

GEBIOMIZED - 2013/2012
ISCO Level 1
ISCO Level 2

RETUL - 2013
Retul Certification

SEROTTA - 2012
Serotta Personal
Serotta Advanced

2016
TORKE Cycling, Body Positioning – Advanced
BikeFit Pro Level 2

2013 ICS (International CycleFit Symposium) Jan 24-26
2013 ISCO (International School of Cycling Optimisation) Nov 11-12
2015 ISCO (International School of Cycling Optimisation) - Workshop presenter
2016 Science and Cycling Conference Jun 29-30
2016 Masterclass: Technology in Cycling Science Jun 28
2016 Masterclass: Science of Cycling injury prevention Jul 1
2016 Medical Fair Asia: Medicine and Sports Conference Sep 1

Timothy also delivers bike fit training as a GebioMized instructor and uses the following technologies during his fits:

Retul (3D motion capture)
gebiomized Bikeview, Bikemess, Cycle, CyclePRO (pressure mapping)
Bioracer motion (3D motion capture)
Bioracer aero (Frontal area measurement)

Carretera del Zabal sn | La Línea de la Concepción, 11300

Anotonio has the following qualifications:

- Degree in sciences of physical activity and sport.
- Level I of Cycling biomechanics (Custom4us)
- Level 2 of Cycling biomechanics (Custom4us)

He uses the following technology during his fits:
- Bike fitting video app (Bike fast fit)
- EMG shorts (Mbody)
- Range of test saddles (Essax and Specialized)
- Computrainer Lab
- Laser level
- Insole (sole)
- WKO4 to analyze the technique of pedaling

Antonio is also the National director of junior cycling team, where he offers bike fit and training to the team. There is also a physiotherapist and podiatrist in his center.

517-519 Flinders Street | Townsville, QLD, 4810

Our fit studio utilises a Trek Precision Fit system with an iPad application (Bike Fast Fit Elite). As a physiotherapist, my process if in depth for each individual person's assessment and incorporates a rehabilitation plan. I have access to a gym with machines, treatment rooms and modalities to achieve the best outcomes. For triathletes, there is also the ability to use the treadmill for assessment of comfort running off the bike. I also have a direct drive windtrainer which has the ability to take through-axles for mountain bike fitting and disc brake road bikes.

2009 San Pablo Ave | Berkley, California, 94702

Dr Jessica Greaux is a Chiropractor with bike fit training from CycloLogic and BikeFit. She has fitted several Pros, both cyclists and triathletes, and has presented at the Medicine of Cycling conference. She has also attended the International School of Cycling Optimization (ISCO) Symposium in Germany.

Jessica uses 2D video analysis, sEMG, and pressure mapping during her fits.

3 Lawrence Grove | Bracknell, Berkshire

Triology Multi Sport Solutions/Bike Science North East | Ellerton on Swale, DL10 6AP

Andy is a Retul certified fitter who sells a host of cycling and triathlon bikes, parts and accessories.

Andy's qualifications include:

Retul certification
Level 3 certificate in Sports Massage,
Level 1 and 2 certificates in Biomechanics
Bike Science: Cycling and the Pelvis.

Andy uses a 3D motion capture system for his fits

553-43 | Seoul, 143-193

DK has been fitting for over 10 years and worked with bike fit education companies, including BikeFit Systems, Velogicfit and Specialized Body Geometry, to help train bike fitters across Korea.

DK also visited the boulder center for sports medicine to learn more about bike fitting with Andy Pruitt.

He has also translated several bike fitting books and manuals including 'BIKE FIT' by Phil Burt.

5 Calle Castillo de la Aguzadera | Alcalá de Guadaíra, 41500

Javier has a BSc in Sport Science and a Masters degree in High Performance. He has attended the following courses:

Custom4.us nivel 1
Custom4.us nivel 2
Custom4.us nivel 3

Javier also helps to deliver the following courses:

Custom4us bike fitting courses
IEWG courses (Cycling biomechanics, Triathlon Aerodynamics, Training & racing with power)
Andalusian Cycling Federation. DS level I (Cycling biomechanics)

He has attended and presented at the following conferes:

Sola, J. & Rodríguez, J. (2015), Describing pedaling technique of amateurs cyclist using electromiograpy (EMG). II Congreso Internacional de Optimización del Entrenamiento y Readaptación deportiva. Universidad de Sevilla.

Ramos, J. & Sola, J (2016).Valoración cinemática y dinámica del sistema de calas con ajuste monodireccional en el ciclismo: validación de una patente. III Congreso Internacional de Readaptación y Optimización del entrenamiento.

During his fits, Javier uses 2D video, IMU, and EMG devices

Rúa Álvaro Cunqueiro | Carballo, 15100

- nivel 1 de custom4.us
- nivel 2 de custom4.us
- retül transition to dynamic bike fit course
- retul certified fitter
- retul tt & triathlon bike fit course
- bikefitting.com certificate of completion static measurement
- bikefitting.com certificate pedaling analyzer

3224 Furlong Way | Gotha, Florida, 34734

Coach Kameel is a recognized coach and bike fitter not only in Central Florida but, across the United States. He has been sought out by clients from as far as Germany, Brazil, China, South America and Australia.

1º 1ª | sa Pobla, Illes Balears, 7420

219 East Main Street | Pullman , Washington, 99163

Brice has been fitting for over 20 years and has attended the following courses:

1993- was trained by Michael Sylvester (worked and trained with him for 4 years)
2001- Serotta Professional bike fit seminar in NY January 2001, 3 day class
2002-in-house Michael Sylvester course.
2008- Trek Fit Services level 2
2015- Precision Fit level 2 ,
2017- Precision Fit Level 3

Brice is also a keen student of body movement, anatomy, yoga, and strength/rehabilitation training as it relates to fitting. He also teaches a bicycle fitting class for new store staff.

During his fits, Brice uses a Purely Custom fit cycle with powerbahn resistance and 360 platform with lift kit, Precision fit motion capture with twin wall-mounted cameras, Precision Fit Gebiomized saddle and insole pressure analysis equipment. He also carries a wide range of saddles and insoles.

120a Sheen Road | Richmond Upon Thames, Surrey, TW9 1UR

James' training includes:

Cyclefit Advanced and foot correction course (a years training under partnership scheme)
Specialized BG fit level 1
ICS attendance 2013
ICS attendance2014
Torke Cycling Body positioning course
Torke Cycling Foot correction course

Boardman Performance Centre | Evesham, WR11 4DS

Bianca is a qualified Physiotherapist and during her fits uses 3D motion capture and 2D video capture

Royal Seat of San Lorenzo de El Escorial | San Lorenzo de El Escorial, 28200

Jorge is a certified Phisyotherapist (since 2001)  and an Osteopath (since 2007). He has been bike fitting since 2011 using 3D motion capture.

Jorge is also the course director and professor of clinical biomechanics of cycling at fisiofocus and works with the IBFI as the Spanish Regional Representative.

25 Herenstraat | Hilversum, 1211 BZ

Jeroen is a trained podiatrist and has attended the following bike fitting courses:

F.I.S.T Fit Institute Slowtwitch
Cycle fit UK
Cycle fit Uk foot analysis
Trek Precision Fit level 1
Trek Precision Fit level 2

He has been fitting since 2008 and uses both 3D motion capture and pressure mapping during his fits. He also has an electronically adjustable fit bike.

2497 Power Rd | Grand Junction , Colorado, 81507

John is an  experienced fitter with a record of  over 3400 fits, including Colorado Mesa University Cycling team and a couple dozen pro's, He is a qualified physiotherapist who has attended multiple bike fit courses, and uses a range of different technology.

79 Collie St | Fyshwick, , A.C.T, 2619

Steve Hogg has a wealth of experience and is one of the most respected fitters in the industry. Over the years he has worked with numerous professionals and well over 10,000 amateurs.

Steve uses a patented method to the restore the prioritising of processing of plantar fascia tension by the cerebellum.

Piazza Vittorio Veneto 8 | Viterbo, 01100

Massimo Iafisco biomechanics training includes :

CONI 1 Level
CONI 2 level
Custom4 us level 1
Custom4us level 2
Custom4us Level 3
Foot clinic custom4us
Trek precision fit level 1
trek precision fit level 2
Kinesio Medical Lab level 1
Scott Fit system

Massimo Iafisco teaches at Custom4.it in Rome , Italy . Mechanics, biomechanics of cycling and running .

Custom4.us level 1
Custom4.us level 2
Custom4.us level 3
Custom4.us foot running
Scott technician level 4
Shimano 4 level
Campagnolo 4 level
DT Swiss wheels technical level 1

Brinklaan 84 | Bussum, Het Gooi, NH 1404GM

232 Upper Richmond Road West | London, London, SW14 8AG

Our fit studio is located on the 1st floor above Pearson cycles next to our physio and massage rooms in a nice quiet location. Our studio is spacious and well lit carrying a large range of saddles , handlebars, stems and insoles and all forms of cleat wedges and spacers. We have 2 full time fitters covering 7 days a week with a range of fittings available. We have a fully adjustable purely custom jig with spin scan software aswell as a power based turbo trainer depending on the clients needs. Our studio is open from 8:30am to 6pm Mon - Saturday and 10-4 on Sundays.

1 Hawk Road | Yeovil, Somerset, BA22 8FA

44 Friedensallee | Elmshorn, 25335

Martin's training includes:

SICI Professional
ISCO I
ISCO II
BG FIT I
BGFIT II
ICS 2013
ICS 2012
cyclfit two day course
cyclologic two day course

Martin uses Dartfish video capture, gebioMized saddle and insole pressure mapping, and an SICI Size Cycle during his fits

6810 Miami Avenue | Cincinnati, Ohio, 45243

Mitch has been fitting for over 10 years and has attended the following courses:

Waterford Fitmaster Certification 2005
FitKit Certification 2005
Retul Level 1 Certification 2011
Retul Level 2 Advanced Certification 2013
GURU Level 1 Certification 2015
FIST Certification 2015
GURU Level 2 Certification 2016

He uses either a 3D motion capture or an electronically adjustable fitting jig during his fits.

5 Nikolaigasse | Villach, 9500

Hannes has been a Retul University bike fit Instructor since 2012 and a Physiohaus bike fit instructor since 2016.

He has attended the following courses

Transition to dynamic Fit
Motion Analysis Certification
Advanced
Medical
Positioned for Speed
Master
SBCU level 1&2

Hannes also attended the following conferences

Boulder Summit 2012
ICS 2016

12 Glenview Close. | Buderim, Queensland, 4556

I have been a bike fitter for 15 years. Fitting Road ,Track ,Triathlon, MTB
My knowledge gathered from many years of racing in Australia and overseas
I have been accredited as a level 2 coach.
I am the designer of the first generation of BIOBIKE Bio mechanical fitting machine.

121 rue d'Auxonne | Bourgogne-Franche-Comté , 21000

00139 | Rome, 00139

Massimo Iafisco biomechanics training includes :

CONI 1 Level
CONI 2 level
Custom4 us level 1
Custom4us level 2
Custom4us Level 3
Foot clinic custom4us
Trek precision fit level 1
trek precision fit level 2
Kinesio Medical Lab level 1
Scott Fit system

Massimo Iafisco teaches at Custom4.it in Rome , Italy . Mechanics, biomechanics of cycling and running .

Custom4.us level 1
Custom4.us level 2
Custom4.us level 3
Custom4.us foot running
Scott technician level 4
Shimano 4 level
Campagnolo 4 level
DT Swiss wheels technical level 1

71 Via Capitelli | Arco, 38062

Javier is a Physical Therapist and Osteopath with the following bike fitting qualifications:

Retul Certified Fitter 2014 , w/ John Dennis ( Basic Motion Capture BF , now level 1), Mallorca, Spain
Retul Mtb Specifics Additional day 2014, w/Hannes Czeitschner ;
AEBC 1st Symposium , Feb 2015 ,Madrid, Spain;
Retul Futbed certification Course 2015 ( now level 2) , w/Yago Alcalde, Madrid, Spain;
Advanced Motion Capture BF course, w/John Dennis 2016, Physiohaus, UK
Management of cycling pathologies, w/ Morgan Lloyd & John Dennis, 2016, Physiohaus, UK;
TT & TRI positioning, w/ John Dennis 2016, Physiohaus, UK
Velosystem basic BikeFitting course w/ Fabrizio Fagioli 2009, Cesenatico, Italy

He uses 3D motion capture during his fits

Bespoke Cycling | London EC2V 7PG
United Kingdom, EC2V 7PG

Body Geometry fit Level 1 (3 days)
Body Geometry fit Level 2 (2 days)

MSc Sports Performance
BSc Sport and Exercise Science
BTEC Sport and Exercise Science

Fit technology;
Laser Level
Turbo with power
Range of test saddles

2D camera
Custom/stock insoles
Adjustable fit bike

3D Camera (Retul Vantage)

Alton Health Centre | Alton, Hampshire, GU34 2RD

My fit studio is an extension to my manual therapy practice and therefore built around 20 years experience in musculoskeletal service as both a Chiropractor and sports massage therapist.

351 N Orlando Ave | Winter Park, Florida, 32792

Drew has done the following courses:
Foot Locker anatomy of athlete's feet and athletic shoe fitting
USA Cycling Coaching Clinic with one day Bike Fit
LAB Cycling Coaching Skills Clinic
Barnett Bicycle Institute Comprehensive Bicycle Mechanics
Barnett Bicyle Institute Principles of Cyclists Position
Barnett Bicycle Institute Elite Technicians Program
Serotta International Cycling Institute Personalized
Serotta International Cycling Institute Advanced
FitKit Bike Fit Fundamentals
FIST Bike Fitting Certification
Esoles Custom Footbed Fitting and Bike Fitting
Trek Precision Fit Level One
Trek Precision Fit Level Two

During his fits, Drew uses the following equipment:
2d camera side view (and front)
geobomized saddle pressure mapping
esoles foot scanner
wheel riser
multiple types of insoles
adjustable fit bike

He has also attended the following CPD courses:
RAD, rotation adjustment device-still an awesome fitting tool for precise rotational cleat adjustment
CrossFit Endurance Cycling Coaching Certification with Bike Fit methodology and cycling biomechanics
CrossFit Endurance Run Coaching Certification with Running biomechanics, muscular strength/balance assessment tools, mobility assessment tools

1112 North Lamar Boulevard | Austin, Texas, 78703

Jerry has 25 years of bike fitting experience with over 4,000 clients. He completed Steve Hogg's bike fitting training in Sydney, Australia in 2012 and has attended Interbike bike fitting seminars for over 15 years.

Jerry's qualifications include:

- Degree in Kinesiology through University of Texas
- Over 8 years using a Racermate Velotron mated to a Calfee Sizer for bike fitting
- Certified though Sally Edwards Heart Zones training
- Certification on Functional Movement Screening through American Council on Exercise
- 15 years as a personal trainer through Timberline Fitness Studio and Castle Hill Fitness
- Certified though Power Plate USA in Whole Body Vibration training
- Dozens of continuing education certifications through American Council on Exercise, Personal Training on the Net, C.H.E.K Institute and American Heart Asso

University Orthopedic Center - University of Utah Health Care | Salt Lake City, Utah, 84108

Ned is a licensed Physical Therapist with a Master's Degree in Physical Therapy.

He has attended bike fitting courses held by BikePT as well as the Medicine of Cycling Conference and Medicine of Cycling Bike Fit University.

Ned also attended a course on foot/ankle biomechanics and orthotics, entitled When the Foot Hits the Ground.

333/15 Porntana Village | Rayong, 21180

Cycling Comfort,.Co.Ltd is a fit studio based in Rayong, Thailand with a variety of different tech, Bike fitting video app, Saddle test, Laser level, Gebiomized saddle pressure mapping, Adjustable fit bike and Shimano force paddling analysis   

4160 Market St. Suite #13 | Ventura, California, 93003

PRIV CORREGIDORA SURR | San Pedro Garza García

FIST Bike Fitting Course (one week)
Bike Fit (Level 2 )
Guru (Range of Right ) Level 2
GebioMized Level 1 and 2

Benito has done more than 600 bike fits, and has the dynamic purely custom pro bike, with the power Bahn to measure cadence, power and the pedal stroke analysis.
Benito uses the software Range of Right for angle measurement, and GebioMized saddle pressure mapping. He is also the Central American course provider for GebioMized and ISCO bike fit training courses.
Benito also has the LEOMO to analyze of the pedal stroke with motion.

183 Ormeau Road | Belfast, BT7 1SQ

Lance McCarthy of McConvey Cycles in Belfast, N. Ireland brought Retül to the shop in 2015 and has been helping riders find their perfect fit ever since

Upham, SO32 1HA

As founder of Vankru Performance Cycling, having competed on the road and track for over twenty five years (including as a semi professional rider in Italy), Garth created Vankru Performance with a desire to use his knowledge and experiences to help athletes excel and overcome the hurdles each and every one of us face. Attending the first European Retul University Course in 2010, he has since been established as one of the longest recognised Retul fitters in Europe and, in 2013, became one of 6 Master Retul Bike Fitters in Europe and the first one in the UK.

Mark joined Vankru Performance in early 2016. Coming from a background in cycle retail, Mark developed a taste for cycling biomechanics back in 2010 with the first course of Specialized's Body Geometry Fit run in the UK. He has since progressed through the training levels to become one of just a handful of "Certified" recognised fitters in the UK.

They use a 3D motion capture system during his fits.

Av jose julio da costa | Ipatinga, Minas Gerais, 55

working with fit at the beginning of 2014 has already been over 2000 evaluations working with STT system and BIO-SIZE.

688 North Milwaukee Avenue | Chicago, Illinois, 60642

6 Hillman Ct | Berwick, 3806

Thad has worked in the cycling industry for over 20 years, including designing geometry for bike brands and helping customers correctly determine the size for custom-made bikes.

Thad is dedicated to continuing his development as a fitter and will be attending a Science of Cycling course this October (2015).

2540 ERIE BOULEVARD EAST | Syracuse, New York, 13224

Zwartveen 6 | Wateringen, 2291NB

Dorien is a podiatrist and for years he has made corrective insoles for cyclists and triathletes with measurements on the bike, but also research into moving in daily life. In the findings of these studies, they made adjustments to the bike but not the complete bikefits.

Mercuriusstraat 22 | Doetinchem, 7006 RL

er has the following experience:

Orthopaedic Technology (15 years measuring, manufacturing, and delivering orthotics and prosthetics)
Certification Sports massages
Certification Injury prevention
International School of Cycling Optimization 1
International School of Cycling Optimization 2
Bikefit: The Foot/Pedal Interface
International School of Cycling 2015 gebiomized
Foam Rolling Principles & Practices (trigger point foam rolling)
Biomechanics of Cycling: Custom4us
ICS Manchester 2016
Training with Jean Luc de Meyer

Longue voie 59D | Ayeneux , Liège , 4630

From 2011 to 2017 I was Pro Cyclist. In the end of 2017 I was starting a activity in the following of cyclists (coaching, lactate testing, hypoxy training and bike-fitting). I increase my fitting level, I was following the Tony Torke's courses in July. I was really happy about the news things learned. From settember I was beginning to have a lot of riders and I'm getting more and more of them. I would like being THE reference in Wallonia (south part of Belgium).

543 Gumizawachō | Yokohama-shi, 245-0062

Makito's training includes:

BIKEFIT Instructor
Retul Master fitter
Retul Certified Fitter

CONFERENCES AND SYMPOSIA
ICS 2013 London attendee 3 days
ISCO 2015 Munster attendee 2 days

Makito uses Retul 3D motion capture during his fits

Unit 9 | Hatton, Warwickshire , CV35 8XB

Welcome to Velo Atelier, Creators of the world leading Clinical Bike Fit™. Our fitting expertise is backed up by over 30 years of experience designing and building bikes at the highest level

Cairnview Road | G66 8BL

Garry has attended the following bike fit courses:

Torque Cycling Body Positioning
Torque Cycling Foot Correction
Torque Cycling Off-Road Positioning
Torque Cycling TT Positioning
Torque Cycling Torque Analysis

Garry offers a satisfaction guarantee...

"If after 3 months a client is not happy with the result and feels that I haven’t done a satisfactory job of significantly improving his or her position, then I will refund them for the fitting and put their contact points back (exactly!) to that of which it was when they first walked in the door."

1002 Pontiac Trail | Ann Arbor, Michigan, 48105

Jessica has attended the following courses:

FitKit Level 2
SICI Level 1 course and certification
F.I.S.T Workshop
Specialized BG Fit Level 1
Specialized BG Fit Level 2
Specialized Certified Master Fitter
Touch For Health Applied Kinesiology Level 1

Jessica also has also done bike fits for the Specialized-Lululemon team

Tehnološki park 19 | Ljubljana, 1000

Borut has a PhD in Sport Science and has presented at numerous conferences across the world. He has been published in scientific journals and helped to develop the S2P force pedal.

Hamilton

16/9 Hoyle Ave | Castle Hill, 2154

Daniel is one of the most experienced Retul fitters in Australia and has studied several fitness and PT courses, including a degree in Medical Science.
Bike Fit Castle Hill

18737 McKeon Court | Noblesville, Indiana, 46062

2721 East Union | Seattle, Washington , 98122

Velopez Bike Fit is an independent bike fit studio that has served Seattle for 5 years. We focus only on Bike Fit and do not retail anything besides the components that we might need during a fit (e.g. Saddle, Stem, Handlebar, Footbeds, etc etc). I founded this studio in 2013 and have since become a BikeFit (Cyclepoint) Certified Instructor and the developer of BikeFit's fitting app for the iPad. I am also slowtwitch certified. The philosophy of fitting at Velopez is concerned with developing as much measurable data as possible and providing fits base on analysis of that data. Said another way, we will take parts of many fitting "schools" and use them to best serve our clients.

Ronde bicycle outfitters | Edinbrugh, EH3 5AZ

Douglas' training includes the following

Bike Fitted over 1000 clients
Bike fitted Mark Beaumont as part of preparation for world cycle
Completed a shadowed fit with Curtis Cramblett in my studio
BSc/Hons Sport Science (2:1)
MSc Sport Performance Enhancement
Retul Level 1
2015 symposium with Gebiomized ISCO
2016 Symposium in Manchester ICS
Completed Functional Movement Screen Qualification
Retul Vantage camera system (3D) plus 2D video analysis
Muve bike
Saddle Pressure map
Level block
lazer level
Computrainer
sell a range of superfeet insoles with superfeet custom insoles
stock test saddles

The Welsh Mill | Frome, BA11 2LE

Tony's training includes:

Cyclefit - 18 month in depth working apprenticeship
Serotta - Personal and Advanced
Fist Workshop
BikeFit - Pro Level 1
BikeFit - Pro Level 2
BikeFit - Pro Clinical
ICS 2014 - Speakers Assistant

Tony also runs the following courses:

Torke Cycling Courses - 14 days
BikeFit - UK courses

Tony uses the following technologies during his fits:

BioBike
Apex Bike Performance
Video Capture

Rua dos Aimores | Belo Horizonte, Minas Gerais, 30140-072

1 Penong Street | Hyde Park, 5061

Anthony's training includes:

- Retul Basic Motion Analysis Course and Certification
- Introduction to Biomechanics (single unit) - University of South Australia
- ISCO Symposium 2015
- Cycling and Science 2017

Anthony uses the following technologies during his fits:
- Gebiomized GP Bike
- Gebiomized GP Cycle Pro
- Dartfish ProSuite
- Basler acA1920-155um high speed camera
- XY coordinate laser measurement system - custom built
- XY coordinate frame and component finder selection tool - excel based system developed in house

Via Pietro Montesi, 51 | Marmore, 05100

Marco has attended the following bike fit courses:

Trek precision fit level 1
Trek precision fit level 2
Specialized BG Fit level 1
Specialized BG Fit Level 2
Custom4us private course

Marco uses the following tools and equipment during his fits:

SST 3DMA motion capture
BIOMOVIE 2D motion capture
RETUL bike size
COMPUTRAINER system
GEBIOMIZED saddle pressure
GEBIOMIZED foot pressure
SRM Bike with Torque pedaling system
SHIMANO/BIKEFITTING duplicator
BTS FREE EMG  surface electromyografy
MYONTEC short EMG
MOXY Monitor SMO2 analyzer
WIVA CYCLE sensor
LACTATE SCOUT + WINLACT software for test
4IT cycling telemetry system
COSMED FIT mate PRO gas analyzer (VO2 max)
AKERN Bioimpedenziometry system

Jalan Raya Serpong KM.8 | Tangerang Selatan, Banten , 15325

Gebiomized 2016/2017
ISCO Level 1
ISCO Level 2

Shimano Bike Fitting Training 2015
- Static
- Motion Analyzer
- Pedal Analyzer

2016 Science and Cycling Conference Jun 29-30
2016 Masterclass: Technology in Cycling Science Jun 28
2016 Masterclass: Science of Cycling injury prevention Jul 1

Bike Fit technology
- Laser level, Wattage-based turbo trainer, Range of test saddles
- Saddle pressure mapping, Wheel riser to recreate climbing/incline, Range of multiple types of insole, Adjustable fit bike
- Single-sided 3D motion capture system, Pedal Analyzer

christian@c2c-bike.com

199/1 Huaykaew Rd | Chiang Mai, 50200

Kwanchai Nualchanchy has a masters degree in sport science along with a host of bike fitting qualifications, including:

Retul certified fitter
Retul advanced certified fitter
Retul positioned for speed certification course
Retul TT & Triathlon bike fit course
ISCO level 1
ISCO level 2
F.I.S.T work shop

Kwanchai uses 3D motion capture and pressure mapping systems during his fits.

Thousand Islands National Park | Mallorytown Landing, Ontario, K0E 1R0

118 Brenner | Hercules, California, 94547

Old Ayr Road | Kilmarnock , East Ayrhsire, KA1 5

Information:

COURSES

1. Bike Fit - online course and exam
2. PhysioHaus - Time Trial and Triathlon Specific Positioning- 1-day course
3. British Cycling (level 2 coaching) - 2 days
4. ABBC (presently studying level 3 award) - online with 1:1 presentation and practical

ACADEMIC AND MEDICAL DEGREES (Max 50%)

1. BA (Hons) Sports Studies
2. PGGCE Physical Education

BIKE FIT TECHNOLOGY

Tier 1 – 10 credits per item, up to 40 max:
1. Bike Fit ipad and phone app - purchased with training course
2. Laser level via X/Y laser tool as part of Shimano Bike Fit jig (bikefitting.com)
3. Wattage-based turbo trainer via Elite Directo, Tacx Flux, Wattbike and 3D power crank via Shimano Jig
4. Range of test saddles via Fizik, ISM, Pro and SQ Lab
5. Multiple cleat fitting tools - Ergon and Bikefitting.com

Tier 2 – 30 credits per item
1 Foot scanner - via pedal analysing software that I work with
2. Adjustable fit bike via the Shimano Jig

Tier 3 – 60 credits per item:
1. Dual-sided 3D motion capture system
2. Foot pressure mapping via

Tier 4 – 90 credits per item
1. Directional force pedals via 3D pedal analyser hardware/software as part of Shimano Bike Fit Jig

25 Fontburn Terrace | NE30 2AE`

Jon has both a BSc and Master of Research degree in Sport Science. He presented some of his research at the World Congress of Cycling Science in Leeds in 2012.

He has attended the following bike fitting courses:

Torke Cycling Body Positioning – Advanced

1215 Briggle Rd  | Akron, Ohio, 44320

Tom Wiseman

1215 Briggle Rd Akron, Ohio 44320

Cycling Solutions

330 338-4307

-IBFI Certified Level 2 Fitter

-USA Cycling Level 2 Coach

-PBMA Certified Mechanic

www.cyclingsolutions.net

17 Coudeveldt | Jabbeke, 8490

Isabel has attained a wealth of knowledge of bike fitting through years of experience. She has attended numerous courses and uses some of the latest technologies in bike fitting. Listed bellow are some of her achievements and information on the course she has attended and technology she employs.

occupational therapist (bachelor degree)
certificate of bicycle repair(man/women)
performed over 2,400 over the 7 years she has been active as an independent bike fitter
Bikefit Pro level 2
ISCO SYMPOSIUM 2013 (2 days)
ISCO SYMPOSIUM 2015 (2 days)
Wielersymposium Bike Motion Benelux 17 - 19 oktober 2014(1 day)
ISCO Level 1& 2
SADDLE PRESSURE from Gebiomized (already since 2010)
FOOT PRESSURE from Gebiomized
MOTION ANALYSIS from Gebiomized
Size Cycle pro from Gebiomized

1 Calle Doctor Ramon Muncharaz | Las Rozas, 28231

Diego's training includes:

Custom4.us nivel 1
Custom4.us nivel 2
Custom4.us nivel 3

He is also the chosen bike fitter of several local teams, including:

Bike fitter of DuoBike Racing Team and Club
Bike fitter of Los Alcazares Cyclist Club
Bike fitter of Vicinay Cadenas Racing Team
Bike fitter of Biked Team

2447 Bloor Street West 1 | Toronto, Ontario, M6S1P7

Odom Health and Wellness Sports Medicine | Minnetonka , Minnesota, 55305

Christopher Balser has been fitting for over 25 years and has trained with Serotta, Specialized, BikeFit, Wobblenaught, and Trek.

Maslog Provincial Road | Cebu

RETUL TRANSITION TO DYNAMIC BIKE FITTING
RETUL CERTIFICATION
GEBIOMIZED LEVEL 1 AND LEVEL 2
BIKE FIT SYSTEM LEVEL 1

During his fits, Frederick uses 3D motion capture, pressure mapping and a virtual windtunnel to assess frontal area and aerodynamics.

Frederick has fitted top asian Duathletes and Triathletes, including the South East Asian Gold medalist for Women's Triathlon and no 2 and no 3 ranked Pilipino Ironman Triathletes.

He has 6 fit studios in the Philippines from San Pablo City laguna, nuvali sta rosa laguna, banawe quezon city metro Manila, San Juan Metro Manila and Balanga bataan procince. He is the official bike fitter for Colnago Philippines, Bianchi Philippines, DeRosa bikes Philippines and Selle SMP Philippines.

1033 Sterling Rd | Herndon, Virginia, 20170

Doug is a Serotta/SICI certified fitter who also has Slowtwitch Triathlon Fitting Certification. He has a Masters degree in Exercise Science and has both ACSM and NASM certifications.

Other qualifications include: Guru DFU fitting; attending Medicine of Cycling bike fitting conference in 2014; and additional courses (at Slowtwitch) from Paul Swift (of BikeFit) on cleat/pedal interface.

Doug uses 2D motion capture and pressure mapping systems during his fits.

North Road | Ambleside, Lancashire, LA22 9DT

"Matt Hallam has been fitting professionally for over 6 years. During this time, he has worked for some of the biggest bike fitting businesses in Europe, most recently at Trek where he managed the Precision Fit operations in the UK. Matt has recently launched 3 Crimson Performance Fit Centres, which can offer a gold-standard fitting service. Crimson Performance is a power-based training and performance testing business, professional bike fitting diversifies this offering. Clients who book in for a Classic Fit can experience a science-lead, evidenced-based and client-focused service. This comprehensive bike fit follows a protocol that has been designed by Matt to deliver maximum results for the client. The Classic Fit includes a pre-screening assessment, 360° Dartfish ProSuite video capture, biomechanical analysis, foot control and pedalling dynamics assessment. Each studio offers a spacious fitting environment.
"

39 St George's Terrace | Newcastle upon Tyne, NE2 2SX

John is a Chartered Physiotherapist who has been working in elite sport for 12 years and through 3 Olympic cycles. He has been a member of Team GB at the last two Olympic Games, with British Badminton at Athens in 2004 and British Triathlon at Beijing in 2008.

Charlottenburger Straße 4 | Berlin , 14169

Courses:
Gebiomized:

ISCO Level I
ISCO Level II
ISCO Level III
Conferences:
ISCO Symposium 2015

Equipment:

- Wattage Based Trainer
- Cyclus 2
- Laser Level
- Bike Fitting Platform
- Front Wheel Riser
- Pressure Messurement Saddle/ Insoles
- Test Saddles
- 2D Cameras Syncronised
- Bioracer Aero System

- Custom Insoles (Solestar - in House build) and Gebiomized

info@bike-academy-berlin.de

0049 30 95 61 79 15

www.bike-academy-berlin.de

340 Bredabaan | Wuustwezel, 2990

Jean Luc's training includes:

Sici advanced
Cyclologic analysis PRO
Bikefit.com level 1
Custom4 us level 1
Custom4us level 2
Custom4us Level 3
Foot clinic custom4us
Trek presision fit level 1
trek presision fit level 2
Certificated Cycling coach (Trainer B Cycling)

He has also attended the following conferences and symposia:
ICS January 2013 (3 day s)
Ics January 2014 (2 days)
ISCO November 2013 (2 days)
Isco November 2015 (2days)

Jean Luc teaches the following bike fitting courses in the Benelux :
Trek presision fit level 1
Trek presision fit level 2
Custom4 us level 1
Custom4 us level 2
Custom4 us level 3

Jean Luc uses Darthfish 4 camera video analysis, Trek motion capture, Presure mapping from gebiomezed, a Serota sizecycle and Mbody (EMG) shorts during his fits.

21 Johann-Krane-Weg | Munster, 48149

The brand name is a combination of our company’s name ‘GeBioM’ and ‘customized’. That’s why the manufacture of the gebioMized products is based on the insights we gained in more than 10 years of research in cycling.

The patent-registered methods of saddle-pressure measurement have been developed in cooperation with Dr. Claus Oehler (Sport Medicine Specialist, Augsburg) and a constant improvement took place based on studies conducted at Münster University.

Molenstraat 29 | Damme, West vlaanderen , 8340

Tom has been working at bike shops for 11 years now, as a technician but also as a bike fitter. 10 years he worked at a Trek Bicycle Store in Bruges he then switched to a specialized store.

10750 Cedar Bend | Hopkins , Minnesota, 55305

Christopher Balser has been fitting for over 25 years and is has trained with Serotta, Specialized, BikeFit, Wobblenaught, and Trek. He has also studied biomechanics and physiology at post-graduate level and is a qualified Yoga instructor and a Yoga teacher training instructor.

Chris is a consultant to Biobike, iCranks, SRAM, Mayo Sports Medicine, LEO, and BTS Bioengineering. He helped to develop the BTS Bioengineering 3D Bike Fit Protocol as well as an integrated 3D/sEMG protocol for Bike Fitting.

Chris uses 3D motion capture and 2D video capture during his fits.

232 Main Street | Kaysville, Utah, 84037

Bikers Edge provides dynamic bike fit with the Retul fit system. Along with that we can provide custom insole molding from Shimano shoes and their heat molding system. A variety of demo saddles are available to trial and we use the Giant saddle fit kit for Giant branded saddles. There is a variety of replacement parts such as stems, handlebars, seatposts and aero bars to be used during the fit process if needed. On hand are bike techs who can work on bikes if required. We are looking to expand our fit options for the 2018 year with a fit bike and advanced systems for saddle pressure mapping, unilateral power measurements, 2D fitting equipment/sofware and education.

CLNW 10/11 bloco D loja 04 | Brasilia, Distrito Federal, 70 686 620

Marcelo has 16 years working with bicycle fitting and has worked with some of the best endurance athletes in Brazil and South America. He holds a degree in Physical Education from the Catholic University of Brasília, Brazil and also a degree in Chinese Traditional Medicine from TAO Institute, Brasília, Brazil. Marcelo was an athlete competing many years in BMX, Triathlon and Road Cycling. He loves bikes and sports, is also a Black Belt in Brazilian Jiu-jitsu. Has several certifications in bicycle fitting, including FIST, Serotta, Retul, Bikefitting.com and Guru.

5 St Ann’s Passage | Manchester, Greater Manchester, M2 6AD

"Matt Hallam has been fitting professionally for over 6 years. During this time, he has worked for some of the biggest bike fitting businesses in Europe, most recently at Trek where he managed the Precision Fit operations in the UK. Matt has recently launched 3 Crimson Performance Fit Centres, which can offer a gold-standard fitting service. Crimson Performance is a power-based training and performance testing business, professional bike fitting diversifies this offering. Clients who book in for a Classic Fit can experience a science-lead, evidenced-based and client-focused service. This comprehensive bike fit follows a protocol that has been designed by Matt to deliver maximum results for the client. The Classic Fit includes a pre-screening assessment, 360° Dartfish ProSuite video capture, biomechanical analysis, foot control and pedalling dynamics assessment. Each studio offers a spacious fitting environment.
"

Unit3, Hawthorne Business Park | Clithroe, Lancashire, BB7 1QD

Nick has more than 30 years experience treating sports injuries. He has a degree in Applied Sports Therapy and a Masters degree in Sports Injury Management and Research.

Nick is a former Sports Therapist to GB and England Cycling teams & Manchester Wheelers. He has conducted several research projects into the biomechanics of cycling and has presented his findings at various conferences and academic establishments/universities.

Nick also served on the Executive Committee of The Society of Sports Therapists and has won two National Cycling Titles (Cyclo-Cross and Age-Group Duathlon).

Forest Row | RH18 5HD

Matt has attended the following bike fit courses:

Specialized BG Fit Level I
Specialized BG Fit Level II
Tony Corke Body Positioning & Foot Correction

During his fits he uses:
Laser level, Wattage based turbo trainer, Range of test saddles, Adjustable wheel riser, and a range of insoles

203 Ricmond Road | Ottawa, Ontario, K1Z6W4

Jesse has attended the following courses:

Retul Certification
Trek Precision Fit Level 1
TrekPrecision Fit Level 2

Jesse also uses the following technologies on a daily basis:

Retul 3D Motion Capture
Trek Precision Fit Pressure Mapping
Trek Precision Fit 2D Video Capture

750 Jervis Street | Vancouver, V6E 4N5

Noa's training includes:
Working with many elite and pro athletes including Olympians in Triathlon and Road, as well as several long course triathlon pros
- Bachelor of Sport Coaching and science
- IOC Post graduate diploma in sports nutrition
- Various sport science conferences, including icsemis 2008, ECSS in 09 & icsemis 2012

Noa uses Retul 3D motion capture and Dartfish 2D video capture during her fits.

She is currently working as a bike fitter in two different venues:
1) Bicicletta bike shop in Vancouver
2) Fortius in Burnaby - one of the largest integrated sport science and medicine facilities in Canada

Rue de Belvedere 1 | Geneva, 1203

Scott is an experienced bike fitter with over 1200 fits he is also a qualified physiotherapist. He focuses his fits around each client's individual anatomy and their functional movements.

1953 Ewing Ave S | Minneapolis, Minnesota, 55416

Christopher Balser has been fitting for over 25 years and is has trained with Serotta, Specialized, BikeFit, Wobblenaught, and Trek. He has also studied biomechanics and physiology at post-graduate level and is a qualified Yoga instructor and a Yoga teacher training instructor.

Chris is a consultant to Biobike, iCranks, SRAM, Mayo Sports Medicine, LEO, and BTS Bioengineering. He helped to develop the BTS Bioengineering 3D Bike Fit Protocol as well as an integrated 3D/sEMG protocol for Bike Fitting.

Chris uses 3D motion capture and 2D video capture during his fits.

Haven 15 | Dronryp, Friesland, 9035BC

Dennis is a well trained bikefitter, working in his own Bikefitstudio in the north of the Netherlands since 2013. He had done a lot of courses for example with Paul Swift, Tony Corke, Lotte Kraus and Niels Heuvelman. In his studio he uses the GebioMized GP Videosupport System (2 cameras), the GebioMized GP Saddle Pressurement System and the Bioracer Aero System.

168 Wilsthorpe Road | Derby, Derbyshire, DE72 3AG

Andy is a Retul Master fitter with a Masters degree in Sport Science focusing on cycling biomechanics. He is also currently studying a part-time PhD in cycling biomechanics.

https://ibfi-certification.com/map-location/andy-brooke-bike-fit-derby-nottingham/?mpfy-pin=7464

135a Shaw Road | Oldham, Lancashire, OL1 3HZ

My bike fit studio is located on the first floor of my cycle shop, I use the Velogicfit system which I full access everything they do. I also have the Shimano Bikefitting static system. As of 1st June we have become the Velogicfit UK Regional hub where we will be selling the software, managing the support and training, i am doing the version 2 3d motion training this month and being training to do the training next month

Crwys Road | Cardiff, CF24 4NR

Ian has been fitting since 2008 and has attended the following courses:

Bikefitting.com static measurements
Bikefitting.com/Shimano Dynamics course
Physiohaus Advanced Motion Capture
Physiohaus TT positioning

He is also a Level 2 cycling coach in Track, Mtb, and Cyclo-cross, and is in the process of attaining his Level 3 coaching qualification.

Ian also attended the recent ICS Symposium (2016).

46001 Grand River Ave | Novi, MI, 48374

We are a sports medicine physical therapy clinic that specializes in endurance athletics.

1650 Tawnygate Way | San Jose, California, 95124

Revolutions In Fitness seeks to help clients identify and reach their fitness, health and athletic goals by applying solid principles and extensive knowledge. Through dedication to our craft, and careful attention to our clients, we at Revolutions In Fitness enjoy seeing positive results and strong gains, time and time again.

Curtis Cramblett has been practicing as a Licensed Physical Therapist (LPT) for over 15 years. He holds a BS in Exercise Physiology and Physical Therapy from Ohio University. He is a Certified Functional Manual Therapist (CFMT) with the Institute of Physical Arts. Continual education and certification efforts are a product of his unique dedication to staying on the cutting-edge of advances in the world of physical therapy and sports medicine.

Curtis' qualifications include:

BS in Exercise Physiology and Physical Therapy
Retul Certification
Speaker at Medicine of Cycling conference
Speaker at Internation CycleFit Symposium

403 Venture Court | Verona, Wisconsin, 53593

Jessica has the following bike fit qualifications:
BS - Kinesiology
MA - Exercises Physiology & Biomechanics
2 years heading Human Performance Laboratory
F.I.S.T. Basic Fit Certified
F.I.S.T. Advanced Fit Certified
GURU Fit Certified

And uses the following tech during her fits:
Dartfish 2D video capture
Power meter (CompuTrainer) on Dynamic Fit Unit, with utilization of SpinScan and pedal stroke analysis
Dyna-crank on Dynamic Fit Unit for determining crank arm length
30 demo saddle line-up
Custom cycling insole line-up with molding oven

295 West Byron Nelson Blvd. | Roanoke, Texas, 76262

Craig has been fitting since 2009 and has attended the following bike fit courses:

Retul Certification
Retul Advanced
Retul Masters
Retul TT Position
Retul Cycling Specific Injury Management
Cyclologic Training - Advanced Pressure Mapping

He has also attended college courses on Anatomy and Physiology and is a USCA level 2 coach. Over the last few years Craig has attended CPD conferences held by Retul and Medicine of Cycling.

During his fits, Craig uses both 3D motion capture and pressure mapping technology.

48003 | Arrigorriaga, 48003

Jon Iriberri is working as cycling technician from 1994 - after discovering his own limitations as a competitive road and MTB racer. Jon developed a research project for his university thesis about internal training load in cycling. This was at a time when Jon was training and fitting many domestic professional riders.

At this time Jon became aware of the limitations of training and condition without also taking into account fitting and biomechanics - both as a source of performance and also possible source of pain and injury. Jon was amazed at a lack of structured biomechanical assessment in the professional peloton throughout the 90's and up to the present day.

From 2000 researches about the relationship of riders antropometrich data and measurements, Jon developed a new approach to cycling biomechanics - from fitting to customizing.

Since then, Jon has gone on to work at the highest levels of cycling, including:

- Lecturer at UCIs World Cycling Center in Aigle.
- CEO of Custom4.us
- Research & Innovation Head in Spanish Cycling Federation 2009 to 2013

3351, boul. des Forges | Trois-Rivières, Québec, G9A 5H7

"L-TIPS is an academic research lab with projects oriented on advanced methods for high performance in cycling. The main goal of the research program is to develop new techniques and approaches to identify the factors limiting the performance of elite cyclists. We work on these topics:
- Human performance
o Develop algorithms to model and predict the performance based on fitness and fatigue
o New physiological test protocols
o Improvement of the mechanical efficiency and pedalling technique (State-of-the-art research equipment available)
o Innovative personalized training methods based on the athlete profile (based on time to exhaustion models)
- Sport and engineering
o Technological tool for performance monitoring
o Wireless sensor integration for real time assessments
o Design original sensors for sports analysis
o Software and apps for athletes and coaches
"

597 Degraw Street Suite 3R | Brooklyn, New York, 11217

Jonathan has attended the following courses:
FIST Level 1
FIST Symposium
Retul L1
Retul Master Fitter Certification
Retul Cycling Specific Injury Management
Guru Level 1

During his fits Jonathan uses 3D motion capture and an electronically adjustable fit bike.

Jonathan is also a bike fit instructor for Guru Cycling

Forrester Street | Worsley, M28 2LJ

Courses
Retül level 1 - 2013 - 40 credits
Retül Advanced motion analysis - 2014 - 80 credits
Retül TT/Tri (Physiohaus) 2013 - 80credits

Conferences
Medicine of Cycling conference 2016 - 20credits
Liverpool John Moore University Cycling Symposium 2016- 10 credits
International Sports Science and Sports Medicine 2011 - 20 credits
British Triathlon Performance Coaching Conference 2014 - 10 credits

Academic/ Medical degrees
BSc (Hons) Physiotherapy Northumbria University 2003 - 160 credits
MSc Advanced Clinical Practice - Teesside University 2012- 320 credits
Post Graduate Diploma Manipulative Therapy Teesside University 2010
Post Gradulate Diploma Musculoskeletal Studies Teesside University 2007
Academic Lead for MSc Clinical Biomechanics, and Lower Limb modules, Salford University (Trauma and Orthopaedics MSc pathway) 2015-current
PhD supervisor - Sunderland University 2013-current - Visualising inertial motion sensor data. A software solution for the analysis of asymmetry in cyclists using optical motion capture technology. (Elizabeth Gandy PhD student, Department of Computing, Engineering and Technology).
Lecturer for Applied Sciences module (Sports Injuries and rehabiltitation) Sunderland University 2009-2010
Clinical Educator - Northumbria University 2008

Bike fit technology
2D multiple cameras - 30 credits
3D Retül double sided - 90 credits
Bike fitting video App's - 10 credits
Wahoo Kickr turbo - 10 credits
Test saddles (Fizik, ISM, SMP) 10 credits
Wheel riser - 30 credits
Insoles - specialised and Siddas - 30 credits
-RESEARCH PURPOSES ONLY - Xsens motion capture suit, pending trial of Perception Neuron motion capture suit.

RPL / CPD
Pro riders:
MTB - 10 credits
Triathlon - 120 credits (British Tri Regional Academy squads- East Midlands and North East)
Cycling - 80 credits (Assisting Phil Burt at British Cycling)
Mechanics courses:
Edinburgh co-op - 10 credits
Cycological Newcastle - 10 credits
Sports Massage ACPSEM - level 4 -2012 - 10 credits
Sports Massage - EIS - 2003 - 10 credits
Instrument assisted massage - 2013 - 10 credits
Myofascial release - 2009 - 10 credits
Olympic weight lifting - UKSCA 2012 - 10 credits
Speed and Agility - UKSCA 2013 - 10 credits
British Triathlon coaching (Level 1 - 2007, Level 2 - 2007) - 10 credits
Training design and coaching advanced certificate - Army- 2002
Gebmiozed 2016- 20 credits

Publications - Gandy, E., et al. (2014) A preliminary investigation of the use of inertial sensing technology for the measurement of hip rotation asymmetry in horse riders. Sports Technology 7:79-88 - 40 credits
Multiple publications in magazines - eg. TriathlonPlus
Pending scientific journal publications -
Investigation of the use of inertial sensing equipment for the measurement of hip flexion and pelvic rotation as a risk factor of lower back injury in horse riders.
A Comparison of Xsens, Retül and Vicon in 3D Motion Analysis of cyclists

17 Bull Plain | Hertford, SG14 1DX

Dean is a Retul Master Fitter, a Physiotherapist and a level 2 Clinical BikeFit Pro.

Dean uses a 3D motion capture system for his fits.

Lane 13, Yongkang Street | Taipei, 106

Winston's training includes:

Retul - Lead Asia Instructor - 3 years
Specialized - Certified Instructor Consultant
Bikefit - Lead Asia Instructor - Present
GURU - Lead Asia Instructor - Present
Velogicfit - Lead Asia Instructor - Present

BikeFit Pro Level 1
BikeFit Pro Level 2
F.I.S.T Workshop
ISCO Level 1
ISCO Level 2
Retul Certification
Retul Advanced
Retul Masters
Serotta Personal
Serotta Advanced 1
BG Fit Level 1
BG Fit Level 2
BG Fit Retul tech class
Can-Fit Pro Certified Personal Trainer
Can-Fit Pro Certified Nutrition Specialist
ICS (International CycleFit Symposium) x2
Medicine of Cycling Conference x1

Winston uses the following technologies during his fits:
Retul 3D Motion Capture System
Gebiomized Pressure Mapping
GURU Fit Machine
Velogic 3D Motion Capture

257 Delaware Avenue | Delmar, New York, 12054

Steven's training includes:

SICI Personal
SICI Advanced
SICI Motion Capture
SICI Triathlon Fitting
Attended Medicine of Cycling Conference
Member of the Medicine of Cycling Bike Fit Task Force
Former - Director of Serotta Fit Lab - 2009-2012

Steven has also assisted in teaching SICI classes and as a mobile Fitting Instructor for local independent bike shops. He has also presented on bike fitting and custom bicycles at the Philly Bicycle Expo and the RPI Bicycle Engineering Symposium.

1549 1100 East | Salt Lake City, Utah, 84105

herentalsebaan 22a | Antwerpen, 2520

- Designer own bike fitting system
- Training Bicycle Fitting System Basic Course by Paul Swift
- Training Bicycle Fitting System Level 2 advanced biomechanical assesment of cycling with specific emphasis regarding problem solving skill’s by Paul Swift.
- Training bij Tony Torke cycling Body Position & Foot correction
- Training Assymetric Course by Tony Torke. Pelvic Assesment
- Developing Appled Kinesiology in Bike Fitting system and I give also courses.
- I do that already for17 years and about 4500 bikefits.
- With Biomechanical Doctor of the University of Reims (France) William Bertucci I do the bikefit for the French Pro Tour Team Francaise des Jeux.

Mobile | Greater Pittsburgh Area, PA 15217

Specialized basic Fit
Specialized Masters' Fit
Specialized TT/Tri and Mtn Bike fit courses
GURU Fit System Certification
MOCC- bicycle Fit Symposium

I have been fitting for about 10 years. from 2007-2013 I was the head fitter of a 3 chain shop in the Pittsburgh Area. Since 2013, I have been an independent fitter working mostly on a mobile basis. I have seen approximately 750-900 fits in my career and have clients from Ironman Pro Triathletes to weekend warriors and recreational cyclists.

E Fairfax Street Shop 116 | Falls Church, Virginia, 22046

Nick is a Retul certified bike fitter with a degree in Sport and Exercise Science.

During his fits he uses a 3D motion capture system.

Unit B1, Old Station Drive | Sheffield, South Yorkshire, S7 2PY

Matthew qualified in 1997 with a BSc (Hons) in Physiotherapy from the University of Birmingham and specialises in the treatment of sports injuries and other musculoskeletal conditions as well as offering a bike fit service.
He gained valuable post graduate experience working in New Zealand and Australia and completed a Post Grad Diploma in Musculoskeletal Physiotherapy at Sheffield Hallam University as well as becoming a member of the Manipulative Association of Physiotherapy. He has always been a keen sportsman and has particular interests in running, triathlons and cycling.
Over the last six years following the completion of a bike fit course at Cyclefit London he has been delivering a bike fitting service. He has continued his professional development in bikefit attending courses at Physiohaus Newcastle with the experienced John Dennis and at Physiosports with Paul Visentini. The benefit of being a Physiotherapist and having a working knowledge of human biomechanics compliments and is fundamental to this service.
In brief following the completion of subjective questionnaire an initial physical assessment will be undertaken by the Physiotherapist to gain an understanding of a cyclist’s body shape, flexibility and whether there are any functional weaknesses or asymmetries relative to cycling. This is followed by an observation of the cyclist pedalling on a static turbo trainer on his/her bicycle.
A variety of measurements of the cyclist and the bicycle will be taken throughout the bike fit to enable appropriate adjustments in order to optimise an individual’s position relative to the type and level of riding. We are all different shapes and sizes with varying trunk and limb lengths and ultimately the bike should be manipulated to fit the individual cyclist. Minor adjustments can be significant when you think of the repetitive nature of the pedalling action.

11 Macklin St | London, WC2B 5NH

CycleFit has fitted thousands of cyclists, from World Champions to old ladies; on time trial machines to Penny Farthings. Bike Fit Manchester

María Rosa Molás 40-B7 | Castellón de la Plana, 12004

La idea y el motivo de crear CYCLING METRIC |ˈsīk(ə)liNG| |ˈmetrik|, surge de una mente inquieta y activa en un Laboratorio de biomecánica deportiva de una Facultad de INEF. Mi nombre es Ximo Borràs, y junto a la Licenciatura en Ciencias de la Actividad Física y el Deporte con la especialidad de Ciclismo, soy Diplomado en Magisterio de Educación Física.

Ximo uses a 3D motion capture system, saddle/insole pressure mapping system and power meters during his fits.